NXAEDT
Digital Inputs extension card for NXAMPmk2
Not compatible with first-generation NXAMPmk1
KEY FEATURES
Adds both AES/EBU and DanteTM inputs to NXAMPmk2 Powered Controllers
4 channels of DanteTM inputs with Switched/Redundant mode and 44.1 kHz to 96 kHz digital audio support
2 channels of AES/EBU inputs with buffered outputs and 44.1 kHz to 96 kHz digital audio support
Highly flexible 4 ports gigabit switch with 4 different configuration modes
Remote control ports configurable as separate network or from the DanteTM network
SPECIFICATIONS
DIGITAL AUDIO 1 INPUT FORMAT
Digital Audio type DanteTM networks
Media type Standard TCP/IP over 1minimum 100 Mb / recommended 1 Gb ethernet network
Number of channels 4 channels from up to 4 different DanteTM devices
Resolution 24 bits
Sample Rate 44.1, 48, 88.2 or 96 kHz
Latency 0.25 ms to 5.0 ms (typical 1 ms)
DIGITAL AUDIO 2 INPUT FORMAT
Digital Audio type AES/EBU
Media type 110 Ohms 3 wires twisted pair with XLR connector
Number of channels 2
Resolution 24 bits
Sample Rate 44.1, 48, 88.2 or 96 kHz
Latency <0.07 ms
REMOTE CONTROL FORMAT
Network format Standard TCP/IP
Device addressing Automatic, based on IP address with Zeroconf
FRONT PANEL FEATURES
Digital audio 1 input/link connectors 4x shielded 1 Gb RJ45 connectors
Digital audio 2 input/link connectors 1x XLR-F and 1x XLR-M buffered output with fail safe relay
LEDs on network ports Link/Activity (Green) and Gigabit (Orange)
GENERAL SPECIFICATIONS
Height x Width x Depth (Net) 40mm x 120mm x 170mm (1.6” x 4.7” x 6.7”)
Height x Width x Depth (Gross) 56mm x 166mm x 225mm (2.2” x 6..5“ x 8.9”)
Weight (Net) 160 g
Weight (Gross) 300 g
Operating temperature range 0° C - 40 °C (32° F - 104° F)
Storage temperature range -20° C - 60° C (-4° F - 140° F)
SYSTEM OPERATION
Compatible Host NXAMPmk2 Powered TD Controllers
