Q8 - 4k Output Card
4x HDMI 2.0, 4X 12G SDI, 8X 10G OPT * 4 Concurrent outputs HDMI/SDI
The 4x HDMI 2.0 and 4x 12G-SDI connectors are divided into 4 groups. Each
group includes 1x HDMI 2.0 and 1x 12G-SDI, and connectors within the same
group copy each other's output. The 12G-SDI connector supports only standard
resolutions under the protocol. When the HDMI 2.0 connector is set to a custom
resolution, the 12G-SDI connector does not output
- Connector 1 (HDMI 2.0) and connector 5 (12G-SDI) form Group 1
- Connector 2 (HDMI 2.0) and connector 6 (12G-SDI) form Group 2
- Connector 3 (HDMI 2.0) and connector 7 (12G-SDI) form Group 3
- Connector 4 (HDMI 2.0) and connector 8 (12G-SDI) form Group 4
4x HDMI 2.0
Up to 4K×2K@60Hz 8bit 4:4:4, or 4K×2K@60Hz 12bit 4:2:2 output
• Support for 8-bit, 10-bit and 12-bit output settings
• Support for 4:2:2 and 4:4:4 output settings
• Support for YCbCr and RGB colour space settings
• Support for HDR outputs
• Support for colour gamut adjustment
• Support for interlaced video signal
• Support for 8-channel embedded audio (24bit/48kHz) • Custom resolutions
- Maximum width: 8192 pixels
- Maximum height: 7680 pixels
4x 12G-SDI
• Compatible with SD-SDI, HD-SDI, 3G-SDI and 6G-SDI
• Support for interlaced video signal
• Support for 8-channel embedded audio (24bit/48kHz)
8x 10G OPT
• Support for single-mode and multi-mode optical outputs
• Transmission distance up to 10km in single mode
• Support for 8-channel embedded audio (24bit/48kHz)
• OPT ports copy outputs on video connectors
- OPT 1 and OPT 2 copy the output from Group 1
- OPT 3 and OPT 4 copy the output from Group 2
- OPT 5 and OPT 6 copy the output from Group 3
- OPT 7 and OPT 8 copy the output from Group 4.
Status LEDs
• Each HDMI output connector has a status LED which indicates the connection
status of backend device. The 12G-SDI and optical port do not have status LEDs
- On: The output connection is normal
- Off: The output connection is abnormal
